Spend less on every load, for the life of the machine.
Commercial laundry equipment engineered to use dramatically less water, energy and detergent — without giving an inch on results. This is where the savings come from.
The price tag is only 8%. The other 92% is up to you.
Buying the machine is the visible tip of the iceberg. Over ten years, energy, water and chemicals dwarf it. Choose efficient equipment and you attack the 92% that actually drains the budget — cycle after cycle after cycle.
Typical 10-year cost of running a commercial laundry. The purchase price is the tip — the machine you choose decides the rest.
Numbers that change the bottom line.
Efficient at every stage of the process.
The savings compound. Extract more water in the wash, dry it faster with less power, and iron more per hour — each stage carries less waste into the next.
- High G-Factor extraction removes far more water before drying begins
- Intelligent weighing sets water & detergent to the real load
- Water-recovery tanks capture and reuse each cycle
- Heat-pump models draw up to 60% less power, no exhaust duct needed
- Humidity sensing stops the cycle the moment linen is dry
- Air recirculation & insulation keep paid-for heat inside
- Radiant burners lift output ~25% at similar gas use
- Moisture-led feeding runs each sheet at its ideal speed
- Gentler on linen — less over-ironing, longer fabric life
Efficiency built in, feature by feature.
Every saving above comes from hardware and control working together. These are the features doing the work.
High G-Factor extraction
Spins linen far drier before it ever reaches the dryer — up to half the residual moisture, so drying is quicker and cheaper.
Intelligent weighing
Weighs each load and matches water and detergent to it exactly — no full-dose cycles on a half-full drum.
Water-recovery tanks
Capture and reuse water across cycles, cutting fresh-water draw sharply on high-throughput laundries.
Heat-pump drying
Recovers and recycles its own heat with no exhaust to the outside — up to 60% less installed power than an electric dryer.
Humidity sensing
A smart sensor ends the cycle the instant laundry is dry — no wasted minutes of heat, and gentler on fabrics.
Air re-cycle & insulation
Warm air is reused inside the drying circuit and held in by full thermal insulation, keeping energy you have already paid for.
Radiant-burner ironing
Lifts ironer output around 25% at similar gas consumption — and works cleanly even at altitude.
Connected monitoring
IoT tracking shows how machines actually run, so consumption is measured and tuned — not guessed at.
Build the most efficient laundry for your site.
Tell us your workload and space. We will spec the exact combination — extraction, heat-pump drying, water recovery and intelligent dosing — that saves you the most, and stands up for years.
Figures are indicative maximums drawn from manufacturer efficiency data and vary by model, load, programme and site conditions. We will confirm the numbers for your specific configuration.